ISO 9001 · ISO 14001 · IATF 16949 · RoHS / REACH
Double-sided tape · OEM / ODM source factory
Custom double-sided tape — tissue, film, foam and acrylic.
Double-coated and transfer tapes engineered for your bond — we make our own acrylic adhesive and BOPP film, then coat, slit and die-cut to your spec. Tune carrier, adhesive, thickness and liner; differential adhesion and custom shapes available.
Width6 – 1280 mm
Thickness0.025 – 3.0 mm
AdhesiveAcrylic · Rubber · Hot-melt
LinerPET · Glassine · Kraft
Double-sided tape, made to order
One bond line, fully engineered.
A double-sided tape is only as good as the match between its adhesive, carrier and your two substrates. Because we run the full chain — from acrylic resin to finished roll — we don’t resell a stock item; we build the construction your application needs.
Choose a thin film for a clean low-profile bond, a tissue or non-woven for splicing and lamination, a foam to fill gaps and damp vibration, or a high-bond acrylic foam to replace rivets and welds. Same adhesive both sides — or a different adhesive on each.
Own adhesive & filmAcrylic PSA and BOPP film made in-house — tack, peel and temperature are tuned, not bought.
Differential adhesionA higher-tack side for quick grab and a removable or repositionable side — on the same tape.
Slit & die-cut to shapeAny width 6–1280 mm, plus kiss-cut / rotary parts on a liner for automated assembly.
Product range
Double-sided tapes by carrier.
Six core constructions — each customizable on adhesive, thickness, color and liner. Not sure which fits? Send your substrates and we’ll recommend one.
Non-woven tissue
Double-sided tissue tape
Thin, hand-tearable, easy to die-cut. The workhorse for splicing, paper/foam lamination and lightweight mounting.
Carrier: tissue / non-woven · Adhesive: acrylic / rubber / hot-melt
Thickness: 0.08–0.15 mm
Thickness: 0.08–0.15 mm
PET / polyester film
Double-sided PET (film) tape
Thin, strong and dimensionally stable for a clean low-profile bond. Great for nameplates, foam lamination and electronics.
Carrier: PET film · Adhesive: acrylic (solvent / water)
Thickness: 0.05–0.20 mm
Thickness: 0.05–0.20 mm
Non-woven fabric
Double-sided non-woven tape
Higher shear than tissue with good conformability — for general assembly and foam / gasket laminating.
Carrier: non-woven · Adhesive: acrylic / hot-melt
Thickness: 0.10–0.25 mm
Thickness: 0.10–0.25 mm
PE / EVA foam
Double-sided foam tape
Closed-cell foam that fills gaps, levels uneven surfaces and damps vibration — signage, mirrors, trims and weatherstrip.
Carrier: PE / EVA foam · Adhesive: acrylic / rubber
Thickness: 0.4–3.0 mm
Thickness: 0.4–3.0 mm
Viscoelastic acrylic foam
Acrylic foam (high-bond) tape
A viscoelastic acrylic core for structural bonding — replaces rivets, welds and screws in automotive and architectural panels.
Carrier: acrylic foam · Adhesive: modified acrylic
Thickness: 0.4–2.0 mm
Thickness: 0.4–2.0 mm
Unsupported (no carrier)
Adhesive transfer tape
Pure adhesive on a liner — the thinnest bond line and the best wet-out on contoured parts, graphics and labels.
Carrier: none · Adhesive: acrylic
Thickness: 0.025–0.13 mm
Thickness: 0.025–0.13 mm
Specifications
Compare the constructions.
Representative ranges to help you shortlist — exact values are confirmed on each product’s data sheet and tuned to your application.
| Type | Carrier | Adhesive | Total thickness | Temp. resistance* | Peel (steel)* | Typical use |
|---|---|---|---|---|---|---|
| Tissue | Non-woven tissue | Acrylic / rubber / hot-melt | 0.08–0.15 mm | –30 to 120 °C | 6–14 N/25mm | Splicing, lamination, die-cut parts, label & nameplate fixing |
| PET film | PET (polyester) film | Acrylic (solvent / water) | 0.05–0.20 mm | –30 to 130 °C | 8–18 N/25mm | Nameplates, foam lamination, electronics, thin strong bonds |
| Non-woven | Non-woven fabric | Acrylic / hot-melt | 0.10–0.25 mm | –20 to 110 °C | 8–16 N/25mm | General assembly, foam & gasket laminating |
| PE / EVA foam | Closed-cell PE / EVA foam | Acrylic / rubber | 0.4–3.0 mm | –20 to 90 °C | 10–20 N/25mm | Signage, mirror & trim mounting, gap fill, vibration damping |
| Acrylic foam (high-bond) | Viscoelastic acrylic foam | Modified acrylic | 0.4–2.0 mm | –40 to 120 °C | Structural / very high | Automotive trim, architectural panels, structural bonding, outdoor |
| Transfer (unsupported) | None | Acrylic | 0.025–0.13 mm | –30 to 120 °C | 6–12 N/25mm | Graphics, labels, low-profile bonds, contoured parts |
*Representative typical values for shortlisting — high-temperature, LSE-plastic and removable formulations are available. Final specs are confirmed per product and against your substrates.
How it’s built
The anatomy of a double-coated tape.
A supported double-sided tape is a six-layer sandwich: adhesive on both faces of a carrier, with a siliconized release liner so the roll won’t stick to itself. A transfer tape drops the carrier — pure adhesive on a liner — for the thinnest possible bond line.
Release liner — siliconized, peels away at application
Adhesive — bonding side A
Carrier — tissue / film / foam (omitted on transfer tape)
Adhesive — bonding side B (can differ from side A)
Release liner — protects side B until use
Where it’s used
Applications.
Signage & POP
Mounting letters, panels and displays — clean, fastener-free.
Automotive trim
Emblems, moldings and interior parts — high-bond, vibration-proof.
Foam & gasket lamination
Laminating foams, gaskets and felts to substrates.
Nameplates & badges
Bonding metal and plastic plates, logos and labels.
Electronics & appliances
Thin, die-cut parts for housings, displays and modules.
Splicing
Paper, film and foil splicing on high-speed lines.
Mirror & panel mounting
Bonding mirrors, ACM panels and rigid sheets.
General assembly
Fast, clean bonding across packaging and manufacturing.
OEM / ODM
What you can customize.
As a source factory we build to your spec, not a fixed catalogue — low MOQ on custom runs, free samples and a quote within one business day.
CarrierTissue, PET film, non-woven, PE/EVA foam, acrylic foam — or unsupported transfer.
Adhesive systemAcrylic, rubber or hot-melt; water- or solvent-based; permanent, removable or repositionable.
Differential coatingA different adhesive or tack level on each side for tricky substrate pairs.
ThicknessFrom 0.025 mm transfer film up to 3.0 mm foam.
Width & lengthSlit 6–1280 mm; any roll length, log rolls or spools.
Color & linerClear, white or black; white/yellow PET, glassine or kraft liner — printable.
Die-cut partsKiss-cut / rotary shapes, finger-lift tabs, sheets or pads on a liner.
Private labelYour logo, core, packaging and print — full OEM/ODM supply.
ComplianceRoHS, REACH and Prop 65 options; third-party reports (SGS / Intertek / BV) on request.
Get the best bond
Three things that make a tape hold.
01 · Substrate
Know your surface energy
Glass and most metals are high surface energy and bond easily. Plastics like PP and PE are low surface energy and repel standard adhesives. Quick field test: drop water on it — if it beads up tight, it’s LSE and needs a tackier or modified-acrylic adhesive.
02 · Surface prep
Clean before you stick
Wipe with a 70/30 isopropyl-alcohol / water mix to remove oils and dust. Heavy oil needs degreasing; oxidized metal needs light abrasion; some LSE plastics benefit from a primer/adhesion promoter.
03 · Dwell time
Let the adhesive wet out
Pressure-sensitive adhesives keep flowing into the surface after application, so bond strength climbs over time. Apply firm pressure, then let it build.
~50% bond at 20 min · ~90% at 24 h · ~100% at 72 h
Need the technical data sheet?
Get full specs — peel, shear, thickness, temperature and liner — plus free samples to test on your own substrates.
Buyer FAQ
Double-sided tape questions.
The things buyers ask before ordering. Don’t see yours? Send it with your spec.
What’s your MOQ for custom double-sided tape?
MOQ depends on the construction and whether it’s a stock or custom adhesive/size, but it’s low for a source factory — tell us the type, size and target quantity and we’ll confirm the exact MOQ with your quote.
Can I get free samples first?
Yes. We ship free samples so you can test on your own substrates before committing — request them with your spec and we’ll send the matching constructions.
Acrylic or rubber adhesive — which do I need?
Acrylic gives the best long-term durability, UV/temperature and solvent resistance. Rubber gives higher initial tack and bonds better to low-surface-energy plastics, but with lower temperature resistance. Tell us your substrate and environment and we’ll match it.
Will it bond to PP / PE and other LSE plastics?
Standard acrylics struggle on low-surface-energy plastics, but we offer modified-acrylic and rubber systems formulated for PP, PE and powder-coated surfaces. Send a sample of your part and we’ll recommend the right adhesive.
How do I choose the thickness?
Thin tissue/film (0.05–0.2 mm) suits flat, well-matched surfaces and low-profile bonds; foam (0.4–3.0 mm) fills gaps, levels uneven surfaces and damps vibration; high-bond acrylic foam handles structural loads and outdoor use.
Can the two sides have different adhesives?
Yes — differential coating lets us put a high-tack permanent side and a removable/repositionable side on the same tape, which is common for tricky substrate pairs.
Can you slit to my width and die-cut shapes?
Yes — we slit 6–1280 mm and produce kiss-cut / rotary die-cut parts, finger-lift tabs, pads and sheets on a liner for automated assembly.
Do you offer private label / OEM?
Yes — your logo, core, liner print and packaging. We supply OEM/ODM for distributors and brands worldwide.
What’s the lead time?
Samples typically ship within a day or two; production lead time depends on quantity and construction and is confirmed on your quote.
Get a custom double-sided tape quote.
Send your substrates, size and quantity — we’ll recommend a construction, send free samples and quote within one business day.