ISO 9001 · ISO 14001 · IATF 16949 · RoHS / REACH
Quality & Certifications
Quality built in at every step — and certified for your market.
As a source factory we check quality from incoming raw material to the finished roll, run our own testing lab, and back it with the international certifications and third-party reports your approval file needs.
Quality systemISO 9001
AutomotiveIATF 16949
ListingsUL · JIS · FSC
ComplianceRoHS · REACH · Prop 65
Our approach
Quality isn’t a final inspection.
A tape that passes a lab test can still fail in the field if the inputs drift. That’s why we don’t rely on a single check at the end — quality is verified at every stage, starting with the raw material and ending with the packed roll.
Because we make our own adhesive and film and convert in-house, we control each variable rather than inheriting it from a supplier. Our own quality system runs the process, our own lab proves the performance, and independent bodies confirm it for the markets you sell into.
Controlled in-houseAdhesive, film and converting are ours — consistency is built, not bought.
Certified systemISO 9001, ISO 14001 and IATF 16949 govern how we work.
Independently verifiedSGS, Intertek and BV confirm performance and compliance.
Certifications & compliance
Certified to sell worldwide.
The management systems, product listings, substance regulations and third-party bodies that back every shipment.
Management system
ISO 9001
Certified quality management system for consistent product and process control.
Management system
ISO 14001
Environmental management system that minimizes waste, energy use and emissions.
Automotive
IATF 16949
Automotive quality standard built on defect prevention for OEM and harness work.
Safety listing
UL
Recognized safety listing for electrical and foil tapes (e.g. UL 510 / UL 181).
Standard
JIS
Conformance to Japanese Industrial Standards for relevant tape grades.
Responsible sourcing
FSC
Chain-of-custody for responsibly sourced paper and kraft backings.
Substance compliance
RoHS
Restricts hazardous substances such as lead, mercury and cadmium.
Substance compliance
REACH
EU chemical regulation, screened against Substances of Very High Concern (SVHC).
Substance compliance
Prop 65
California disclosure standard for listed chemical substances.
Independent testing
SGS
Third-party testing and verification of performance and compliance.
Independent testing
Intertek
Independent inspection and product testing to recognized methods.
Independent testing
BV
Bureau Veritas third-party conformity assessment and testing.
In-house testing lab
What we test on every product.
Performance is measured against the data sheet using recognized methods — so what you sample is what you receive in production.
Peel adhesion
Force to peel the tape from a standard surface at a set angle and speed.
ASTM D3330Initial tack
How quickly and firmly the adhesive grabs on first contact with light pressure.
Holding power / shear
Resistance to sliding or creep under continuous load over time.
Tensile & elongation
Breaking force and the stretch a tape reaches before it snaps.
Dielectric strength
The voltage an electrical insulating tape withstands before breakdown.
Thickness / caliper
Total and layer thickness controlled across the web.
Heat-aging & temp
Adhesion and integrity after exposure to heat and time.
Compression set
How well a foam recovers after a compressive load is removed.
ASTM D1056Flame retardancy
Self-extinguishing behavior for electrical and FR-rated tapes.
UL 94Unwind force
Consistent, clean release from the roll without splitting or jumping.
Adhesion to steel
Bond to a stainless-steel reference panel for a repeatable benchmark.
Clean removal
No residue or surface damage for protection and painter’s grades.
Quality control
Checked at every stage.
Four control gates from raw material to dispatch — so defects are caught early, not by your line.
01 · Incoming
Raw material
Adhesive, film, scrim, foil and liner are verified before they enter production.
02 · In-process
Coating & converting
Checks at coating, slitting and die-cutting catch any drift while it’s still fixable.
03 · Finished roll
To the data sheet
Peel, tack, dielectric, thickness and dimensions tested against the spec.
04 · Pre-shipment
Final & documents
Final inspection, correct packing and the paperwork before the goods dispatch.
Incoming → In-process → Finished → Pre-shipment · every batch
For your approval file
The documents you need to qualify us.
Bringing a new supplier through your approval process takes paperwork. We provide the technical and compliance documents your engineering and quality teams require — on request, with your order.
Request documents →Technical Data SheetTDS with full performance specs
Safety Data SheetSDS / MSDS for handling & transport
Certificate of AnalysisCOA for the supplied lot
Third-party test reportsSGS / Intertek / BV results
Compliance declarationsRoHS / REACH / Prop 65
Drawings & specsDimensional drawings for die-cuts
Responsible manufacturing
Compliant — and more sustainable.
Meeting environmental standards and offering greener constructions where your application allows.
ISO 14001A certified environmental management system across our plants.
Water-based acrylicSolvent-free, low-VOC adhesive options for greener production.
FSC paperResponsibly sourced paper and kraft backings on request.
Restricted substancesRoHS, REACH (SVHC) and Prop 65-compliant formulations.
Need our quality documents or a sample to test?
Tell us your product and market — we’ll send the relevant TDS, SDS, COA and compliance declarations, plus free samples to qualify on your own line.